Key Specifications
| Spec | Value |
|---|
| Production Years | 1961—1979 |
| Manufacturer | MG (British Motor Corporation / British Leyland) |
| Assembly | Abingdon-on-Thames, Oxfordshire, England |
| Body Style | 2-door roadster |
| Layout | Front engine, rear-wheel drive |
| Construction | Steel monocoque (unibody) |
| Wheelbase | 2,032 mm (80.0 in) |
| Overall Length | 3,480 mm (137.0 in) — chrome bumper; 3,607 mm (142.0 in) — rubber bumper |
| Overall Width | 1,397 mm (55.0 in) |
| Overall Height | 1,194 mm (47.0 in) |
| Kerb Weight | 705 kg (1,554 lb) — Mk1; 728 kg (1,605 lb) — Mk3; 839 kg (1,850 lb) — 1500 |
| Fuel Tank Capacity | 31.8 L (7.0 imp gal) |
| Boot Capacity | 170 L (6.0 cu ft) |
Engine Specifications
9CC — A-Series 948cc (Mk1, 1961—1962)
| Spec | Value |
|---|
| Configuration | Inline 4, OHV, 8-valve |
| Displacement | 948 cc |
| Bore x Stroke | 62.94 mm x 76.2 mm |
| Compression Ratio | 8.3:1 |
| Power | 34 kW (46 hp) @ 5,500 rpm |
| Torque | 72 Nm (53 lb-ft) @ 3,000 rpm |
| Fuel System | Twin SU HS2 carburettors |
| Ignition | Contact breaker points |
| Valvetrain | Pushrod OHV, solid lifters |
| Oil Capacity | 3.4 L (with filter) |
| Recommended Oil | 20W-50 mineral |
| Redline | 6,500 rpm |
10CC — A-Series 1098cc (Mk2, 1962—1966)
| Spec | Value |
|---|
| Configuration | Inline 4, OHV, 8-valve |
| Displacement | 1,098 cc |
| Bore x Stroke | 64.58 mm x 83.72 mm |
| Compression Ratio | 8.5:1 |
| Power | 44 kW (59 hp) @ 5,750 rpm |
| Torque | 87 Nm (64 lb-ft) @ 3,250 rpm |
| Fuel System | Twin SU HS2 carburettors |
| Ignition | Contact breaker points |
| Valvetrain | Pushrod OHV, solid lifters |
| Oil Capacity | 3.4 L (with filter) |
| Recommended Oil | 20W-50 mineral |
| Redline | 6,500 rpm |
12CC — A-Series 1275cc (Mk3, 1966—1974)
| Spec | Value |
|---|
| Configuration | Inline 4, OHV, 8-valve |
| Displacement | 1,275 cc |
| Bore x Stroke | 70.64 mm x 81.33 mm |
| Compression Ratio | 8.8:1 |
| Power | 48 kW (65 hp) @ 6,000 rpm |
| Torque | 95 Nm (70 lb-ft) @ 3,250 rpm |
| Fuel System | Twin SU HS2 carburettors |
| Ignition | Contact breaker points / electronic (late models) |
| Valvetrain | Pushrod OHV, solid lifters |
| Oil Capacity | 3.4 L (with filter) |
| Recommended Oil | 20W-50 mineral |
| Redline | 6,500 rpm |
Triumph 1493cc (1500, 1974—1979)
| Spec | Value |
|---|
| Configuration | Inline 4, OHV, 8-valve |
| Displacement | 1,493 cc |
| Bore x Stroke | 73.7 mm x 87.5 mm |
| Compression Ratio | 7.5:1 (US spec) / 8.0:1 (UK spec) |
| Power | 49 kW (66 hp) @ 5,500 rpm |
| Torque | 113 Nm (83 lb-ft) @ 3,000 rpm |
| Fuel System | Single SU HIF44 or Zenith-Stromberg 150 CD |
| Ignition | Electronic |
| Valvetrain | Pushrod OHV, solid lifters |
| Oil Capacity | 3.7 L (with filter) |
| Recommended Oil | 20W-50 mineral |
| Redline | 5,500 rpm |
Transmission Options
| Transmission | Type | Gears | Applications |
|---|
| BMC A-series close-ratio | Manual | 4-speed (1st non-synchro) | Mk1 |
| BMC A-series all-synchro | Manual | 4-speed | Mk2, Mk3 |
| Triumph 4-speed | Manual | 4-speed | 1500 |
| Triumph 4-speed + OD | Manual + overdrive | 4-speed + OD on 3rd/4th | 1500 (optional, late) |
Gear Ratios (Mk3, 1275cc)
| Gear | Ratio |
|---|
| 1st | 3.63 |
| 2nd | 2.37 |
| 3rd | 1.41 |
| 4th | 1.00 |
| Reverse | 4.66 |
Gear Ratios (1500)
| Gear | Ratio |
|---|
| 1st | 3.50 |
| 2nd | 2.28 |
| 3rd | 1.45 |
| 4th | 1.00 |
| Reverse | 3.57 |
Final Drive Ratios
| Model | Ratio |
|---|
| Mk1 (948cc) | 4.22 |
| Mk2 (1098cc) | 4.22 |
| Mk3 (1275cc) | 3.90 |
| 1500 | 3.90 |
| 1500 (overdrive) | 3.90 |
Suspension
| Component | Front | Rear |
|---|
| Type | Independent, double wishbone | Live axle, semi-elliptic leaf springs |
| Springs | Coil | Leaf (semi-elliptic) |
| Dampers | Lever-arm hydraulic | Lever-arm hydraulic |
| Anti-roll Bar | Yes (from Mk3) | No |
| Uprights | Kingpin (Mk1—Mk3) / ball joint (1500) | N/A |
Brakes
Mk1
| Component | Front | Rear |
|---|
| Type | Drum | Drum |
| Diameter | 178 mm (7.0 in) | 178 mm (7.0 in) |
Mk2, Mk3, 1500
| Component | Front | Rear |
|---|
| Type | Solid disc | Drum |
| Disc Diameter | 210 mm (8.27 in) | — |
| Drum Diameter | — | 178 mm (7.0 in) |
| Servo Assisted | No (Mk2/Mk3), Yes (1500) | — |
| ABS | Not available | — |
Steering
| Spec | Value |
|---|
| Type | Rack and pinion |
| Power Assist | Not available |
| Turns Lock-to-Lock | 2.33 |
| Turning Circle | 8.8 m (28.9 ft) |
| Model | 0—60 mph | 0—100 km/h | Quarter Mile | Top Speed |
|---|
| Mk1 (948cc) | 20.0 s | 21.5 s | 21.5 s | 137 km/h (85 mph) |
| Mk2 (1098cc) | 17.0 s | 18.2 s | 20.5 s | 145 km/h (90 mph) |
| Mk3 (1275cc) | 13.0 s | 13.8 s | 19.0 s | 153 km/h (95 mph) |
| 1500 | 12.3 s | 13.2 s | 18.7 s | 157 km/h (98 mph) |
Fuel Economy (Approximate, Mixed Driving)
| Model | L/100 km | mpg (imperial) |
|---|
| Mk1 (948cc) | 7.0 | 40 |
| Mk2 (1098cc) | 7.5 | 38 |
| Mk3 (1275cc) | 8.0 | 35 |
| 1500 | 9.0 | 31 |
Tyre Specifications
| Model | Standard | Optional |
|---|
| Mk1/Mk2 | 5.20-13 crossply | 145SR13 radial |
| Mk3 | 145SR13 radial | 155/70R13 |
| 1500 | 155/70R13 | 165/70R13 |
Wheel Specifications
| Spec | Value |
|---|
| Standard | 13” x 3.5” steel (disc wheels) |
| Optional | 13” x 3.5” wire wheels (48-spoke, centre-lock) |
| Wire Wheel Hub | Centre-lock knock-off |
| Bolt Pattern (disc wheels) | 4 x 101.6 |
Electrical
| Spec | Value |
|---|
| System | 12V negative earth (from Mk3; earlier cars positive earth) |
| Battery | 12V, 40 Ah |
| Charging | Dynamo (Mk1—Mk2) / alternator (Mk3 onwards) |
| Headlights | 7” sealed beam |
| Fuses | 2 (early) / 4 (late) |
Interior Dimensions
| Dimension | Value |
|---|
| Headroom (hood up) | 838 mm (33.0 in) |
| Legroom | 965 mm (38.0 in) |
| Shoulder Width | 1,118 mm (44.0 in) |
| Seats | 2 |
Service Intervals
| Service Item | Interval |
|---|
| Engine oil and filter | 5,000 km or 6 months |
| Valve clearance adjustment | 10,000 km |
| Contact breaker points | 10,000 km |
| Spark plugs | 20,000 km |
| Air filter | 20,000 km |
| Carburettor service | 5,000 km |
| Coolant | 24 months |
| Brake fluid | 24 months |
| Gearbox oil | 40,000 km |
| Rear axle oil | 40,000 km |
| Kingpin greasing (Mk1—Mk3) | 5,000 km |
| Wire wheel spoke tension (if fitted) | 10,000 km |
Model Variants Summary
Mk1 (1961—1962)
| Spec | Value |
|---|
| Engine | 948cc A-series |
| Power | 34 kW (46 hp) |
| Price New | £472 (plus purchase tax) |
| Notable | Drum brakes all round, side curtains (no wind-up windows), quarter-elliptic rear springs |
Mk2 (1962—1966)
| Spec | Value |
|---|
| Engine | 1,098cc A-series |
| Power | 44 kW (59 hp) |
| Price New | £495 (plus £103 13s 9d tax) |
| Notable | Front disc brakes, wind-up windows, quarter-elliptic rear springs |
Mk3 (1966—1974)
| Spec | Value |
|---|
| Engine | 1,275cc A-series |
| Power | 48 kW (65 hp) |
| Price New | £660—£980 (over production run) |
| Notable | Best-regarded variant, chrome bumpers, half-elliptic rear springs (from 1964 redesign), anti-roll bar |
1500 (1974—1979)
| Spec | Value |
|---|
| Engine | 1,493cc Triumph |
| Power | 49 kW (66 hp) |
| Price New | £1,560 (1975) |
| Notable | Rubber bumpers, raised ride height, Triumph engine, Rostyle wheels, half-elliptic rear springs, optional overdrive |
Production Numbers (Worldwide, Approximate)
| Variant | Units |
|---|
| Mk1 (948cc) | ~16,000 |
| Mk2 (1098cc) | ~26,000 |
| Mk3 (1275cc) | ~100,000 |
| 1500 | ~73,000 |
| Total | ~225,000 |
Austin-Healey Sprite (all marks): approximately 130,000 additional units on the same platform.